Operation Of Your Treadmill - Xterra 1644980US Owner's Manual

Operation of your treadmill

GETTING STARTED:
CAUTION: Before operating the console, read the following precautions:
Do not stand on the walking belt when turning on the treadmill
Always wear the safety key. Pulling the safety key will stop tread-belt movement.
Adjust the speed in small increments to avoid sudden jumps in speed
To reduce the possibility of electric shock, keep the console dry. Avoid spilling liquids on
the console and place only sealed water bottles in the water bottle holders.
Do not use excessive pressure on console control keys. They are precision set to
function properly with little finger pressure. Pushing harder is not going to make the unit
go faster or slower.
Understand that changes in speed and incline do not occur immediately. Set your
desired speed on the computer console and release the adjustment key. The computer
will obey the command gradually.
How to use the safety key
1. Place the magnet into position on the round metal portion of the console control head. Your
treadmill will not start and operate without this. Removing the magnet also secures the treadmill
from unauthorized use.
2. Fasten the plastic clip onto your clothing securely to assure good holding power. Note:
The magnet has strong enough power to minimize accidental, unexpected stopping. The
clip should be attached securely to make certain it does not come off. The treadmill will stop,
depending on speed, with a one to two step coast anytime the magnet is pulled off the
console. Use the red Stop / Pause switch in normal operation.
Customer Service 1-888-707-1880
Email: customerservice@dyaco.ca
12
Dyaco Canada Inc. 2014