Network Setting (Mac Os X); Configuring The Printer Driver Destination; Configuring The Printer's Appletalk Network Settings - Canon ipf6350 User Manual

Network Setting (Mac OS X)

Configuring the Printer Driver Destination ...................................................................................................... 955

Configuring the Printer's AppleTalk Network Settings ..................................................................................... 955

Configuring the Destination for AppleTalk Networks ...................................................................................... 956
Configuring the Destination in TCP/IP Networks ............................................................................................ 958
Configuring the Destination for Bonjour Network ........................................................................................... 960
Configuring the Printer Driver Destination
Specify the printer driver destination as follows if the printer's IP address is changed, or if you will use the printer over a
network connection instead of via USB connection.
• If you switch to printing in a TCP/IP network, or if the printer's IP address is changed, see "Configuring the Destina-
tion in TCP/IP Networks ."
• If you switch to printing in a Bonjour network, see "Configuring the Destination for Bonjour Network ."
Configuring the Printer's AppleTalk Network Settings
Follow the steps below to configure the AppleTalk network settings.
1.
Start the web browser and enter the following URL in the Location (or Address ) box to display the RemoteUI
page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
2.
Select Administrator Mode and click Logon.
3.
If a password has been set on the printer, enter the password.
4.
Click Network in the Device Manager menu at left to display the Network page.
5.
Click Edit in the upper-right corner of the AppleTalk group to display the Edit AppleTalk Protocol Settings page.
6.
Refer to the AppleTalk Settings Items table to complete the settings.
AppleTalk Settings Items
Item
Phase Specify whether to use AppleTalk.
Type If you will use AppleTalk, choose Phase 2.
If you will not use AppleTalk, choose Disabled.
Name Specify the object name used by AppleTalk (in up to 31 single-byte or 15 double-
(*1) byte characters).
However, do not use the following single-byte characters: @, *, :, and =.
Zone (*2) Specify the printer zone name, up to 31 single-byte characters.
However, do not use the following single-byte characters: Also avoid using * (which
represents the default zone) in the middle of a string.
iPF6350
Downloaded from ManualsPrinter.com Manuals
→P.958
Details
Network Setting > Network Setting (Mac OS X)
Configuring the Printer Driver Destination
>
→P.960
10
Default Setting
955
Disabled
Canon
NB-18GB
(xxxxxx)
*