Specifying Printer-Related Information - Canon ipf6350 User Manual

Network Setting
Perform dynamic updating of
stateful addresses
Dynamically update the stateless
address
Dynamically update the manual
address
7.
Click OK to display the Network page.
Note
• If you are using a DNS server, select Enable DNS Dynamic Update and enter the IP Address for DNS serv-
ers and DNS domain name in Primary DNS Server Address, Secondary DNS Server Address and DNS
Domain Name, respectively.

Specifying Printer-Related Information

Follow the steps below to specify device information and security settings.
1.
10
Start the web browser and enter the following URL in the Location (or Address ) box to display the RemoteUI
page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
2.
Select Administrator Mode and click Logon.
3.
If a password has been set on the printer, enter the password.
4.
Click Information in the Device Manager menu at left to display the Information page.
5.
To display the relevant settings page, click Edit in the upper-right corner of Device Information or Security, de-
940
pending on what information you want to specify.
To change the administrator password, click the Change Password button in the Security group.
6.
Refer to the table of settings for device information and security as you complete these settings.
Security setting items are displayed when you click the Change Password button in the Security group.
Device Information Settings
Item
Device Name
Specifying Printer-Related Information
Downloaded from ManualsPrinter.com Manuals
> Network Setting >
Item
DNS Host Name Specify the printer host name, up to 63 characters (1–
63 characters). Use single-byte letters, numbers, and -
(hyphens). Do not use numbers or - for the first charac-
ter or - for the last character.
DNS Domain Name Specify the printer domain name, up to 63 characters.
Use single-byte letters, numbers, - (hyphens), and . (pe-
riods). Do not use numbers, -, or . for the first charac-
ter, or - or . for the last character.
Activate this setting to automatically register the state-
ful address with the DNS server.
Activate this setting to automatically register the state-
less address with the DNS server.
Activate this setting to automatically register the man-
ual address with the DNS server.
Enter a device name.
(0–32 characters)
Details
Details
Default Setting
NB-18GBip6xxxxxx
blank
Off
Off
Off
Default Setting
blank
iPF6350