Notifications; Status Led; Audio - CipherLab RS31 Reference Manual

2.4.

NOTIFICATIONS

2.4.1. STATUS LED

An LED indicators located above the touch screen provide information about charging status,
scanner light beam, and scanner "Good Read" during data collection.
Indicator
Charging
Barcode or RFID tag
decode
The device is on backup
battery power
(the battery cover is
removed)
Note: For Scanner decode and Scanner beam LED to function, LED notification must be
enabled in Reader Configuration.

2.4.2. AUDIO

The speaker is used to play sounds for events in windows and programs, or play audio files.
In addition, it can be programmed for status feedback. In noisy environments, you may
consider connecting a headset instead. A headset jack is provided on the top of the mobile
computer, which is a 3.5 mm DIA stereo earphone jack. The mobile computer also supports
using Bluetooth headsets.
Supported audio file formats include: WAV, MP3, AAC, AAC+, Enhanced AAC+, AU
(including ADPCM), Midi, XMF, AMR (NB and WB).
Use the volume buttons on the side of the mobile computer to adjust the system volume.
Status
Green, solid
Red, solid
Red, blinking
Green, flash once
Red, solid
Using the RS31 Mobile Computer
Charging complete
Charging the mobile computer
Charging error (for instance, battery not in
place)
Good read
Upon the removal of the battery cover, the red
light is on for a while and then goes off to
signal that the main battery is ready to be
removed.
59
Description