Installing The Mcu Software; Confirming That The Installation Of The Software Is Complete - Sony Ipela PCS-XG80S Operating Instructions Manual

Installing the MCU Software

1
Turn off the power of the Communication System.
2
Insert the Key Module of the PCSA-MCG80 HD MCU software into the
TABLET connector.
3
Press the
The PCSA-MCG80 HD MCU software is installed in the System.

Confirming that the Installation of the Software is Complete

The installed software is indicated in "Software Option" under the Machine
Information page of the Machine Status menu.
Machine Status > Machine Information
For details, see "Machine Information" on page 93.
190
Installing the MCU Software
to TABLET
PCSA-MCG80 HD MCU software
? / 1 (power) switch on the System to turn it on.
Host Version
Machine Information
Software Option
Option I/F
Host Name
IP Address
IP Address(LAN2)
MAC Address
MAC Address(LAN2)
Serial Number
Previous Save
2.00
Multipoint
None
pcshost
0:0:0:0:0:0:0:0
0:0:0:0:0:0:0:0
00-1A-80-78-6F-C8
00-1A-80-78-6F-C9
4294967295
Cancel