Sony Ipela PCS-XG80S Operating Instructions Manual page 162

Start
Drawing Rights
To start drawing
Press the < key on the tablet.
To stop drawing
Press the > key on the tablet.
To change the color
Press the lower pen button. Each press changes the color. You can select from
among black, red, blue, green, yellow, orange, purple and white.
To change the line density
Press the upper pen button. Each press changes the line density. You can select
from three different line densities.
To erase with the eraser
Touch the tail switch (eraser) of the pen onto the tablet and move it on the
letters or graphics you want to erase.
To erase all written letters and graphics
Press the FN2 key on the tablet.
To obtain the drawing rights
Normally, the drawing rights belong to the party who starts annotation. In the
case that the remote party starts annotation, the Obtain Drawing Rights button
appears and the
the monitor screen on the local site.
If you want to obtain the drawing rights, press the FN1 key on the tablet. The
screen, and you are allowed to write letters and graphics on the screen.
To save the drawings written using annotation
1
Insert a "Memory Stick" in which you want to save the drawings using
annotation into the Communication System.
162
Using the Annotation Function
Stop
Erase All
indicator (Drawing executed by the remote party) on
indicator (Drawing executed by the local party) appears on the monitor
Eraser
Select Line Density
Select Color