Lan Setup Menu - Sony Ipela PCS-XG80S Operating Instructions Manual

Audio Input
Allows you to select the audio input which is
linked to the video input selected in "Video
Input" when "Link to Audio Input" is set to
"On".
MIC: Inputs audio from the microphone.
AUX: Inputs audio from the external
equipment.
MIC+AUX: Inputs audio both from the
microphone and external equipment.
Input Select (MIC)
Input Select (AUX)
Allows you to select the audio input from the
microphone and/or external equipment
when "Link to Audio Input" is set to "On".
The options that can be selected vary with
the Audio Input setting.
When you select "MIC" from "Audio
Input", you can select one of the following
four options. When you select "AUX", you
can select "AUDIO 1" or "AUDIO 2".
When you select "MIC+AUX", you can
select two options: one microphone input
from "MIC (A1/A3)", "EC MIC (A7)",
"AUDIO 1" or "AUDIO 2", and one
auxiliary external input from "AUDIO 1" or
"AUDIO 2".
MIC (A1/A3): Select use of the PCS-A1
microphone (supplied with the PCS-
XG80) or PCSA-A3 microphone (not
supplied) connected to the MIC (A1/A3)
jacks on the Communication System.
EC-MIC (A7): Select use of the PCSA-A7
echo canceling microphone (not
supplied) connected to the EC-MIC
(A7) jacks on the Communication
System.
AUDIO 1: Select to input the audio of
external equipment connected to the
AUDIO 1 IN jacks on the
Communication System.
AUDIO 2: Select to input the audio of
external equipment connected to the
AUDIO 2 IN jacks on the
Communication System.

LAN Setup Menu

The LAN setup menu is used to set up LAN
connection.
74
Registering Local Information
For details about the settings, consult your
network administrator.
Note
The contents of the LAN setup menu vary with
the "Use LAN2" setting in the Line Interface
setup menu, or "Internet Protocol" setting in
the Administrator setup menu.
The LAN page number after the LAN2 page
also varies according to the number of setting
items.
LAN
Basic Setup
Host Name
Enter your host name (up to 30 characters).
DHCP Mode
Allows you to select whether the Dynamic
Host Configuration Protocol (DHCP) server
is enabled.
Auto: The IP address, network mask,
gateway address and DNS address are
automatically assigned.
Off: Disables the DHCP server. In this case,
enter an IP address, network mask,
gateway address and DNS address.
Prefix Length
Configure the prefix length of the IPv6
address within the range of 0 to 128.
IP Address
Enter the IP address.
Network Mask
Enter the network mask.
Gateway Address
Enter the default gateway address.
Primary DNS
Enter a primary DNS address.
Secondary DNS
Enter a secondary DNS address.
LAN Mode
Allows you to select the interface type and
the communication mode of the LAN
connection.