Recording during a Communication
You can record the voices of participants on both the remote and local sites
during a communication if you connect an audio recorder to the REC OUT
jack on the Communication System.
This is convenient for taking minutes of the communication.
To connect an audio recorder
Audio recording device
to audio
inputs
When recording with an audio recorder
When an audio recorder is connected to both the AUDIO IN and REC OUT
jacks, set "Recording Mute" to "On" on the Basic Setup1 page of the Audio
setup menu, since the echo may cause and is transmitted to a remote party
(page 69).
To record the sound output from the REC OUT L/R jacks in 2-channel
monaural, set "REC OUT Mode" to "Monaural 2ch" on the Basic Setup2 page
of the Audio setup menu.
EC-MIC(A7)
Audio cable (not supplied)
Recording during a Communication
VISCA OUT
TERMINAL
CAMERA
S VIDEO IN
RGB IN
RGB OUT
HDMI OUT
ISDN UNIT
MIC(A1/A3)
1(R)
2(L)
1
2
R
L
R
L
R
L
AUDIO 1 IN
AUDIO OUT
REC OUT
1-EXT-2
(PLUG IN POWER)
to REC OUT L/R
AUX CONTROL
DC 19.5V
1
2
171