Sony Ipela PCS-XG80S Operating Instructions Manual page 70

Audio1
Basic Setup1
Audio Input
Allows you to select the audio input.
MIC: Inputs audio from the microphone.
AUX: Inputs audio from auxiliary external
equipment.
MIC+AUX: Inputs audio from the
microphone and auxiliary external
equipment.
Note
When "Link to Audio Input" is set to "On" in
the Video setup menu, "Audio Input", "Input
Select (MIC)" and "Input Select (AUX)"
cannot be selected.
Input Select (MIC)/
Input Select (AUX)
Allows you to select the microphone and/or
external equipment from which an audio
signal is input.
The options that can be selected vary with
the Autio Input setting.
When you select "MIC" from "Audio
Input", you can select one of the following
four options. When you select "AUX", you
can select "AUDIO 1" or "AUDIO 2".
When you select "MIC+AUX", you can
select two options: one microphone input
from "MIC (A1/A3)", "EC MIC (A7)",
"AUDIO 1" or "AUDIO 2", and one
auxiliary external input from "AUDIO 1" or
"AUDIO 2".
MIC (A1/A3): Select use of the PCS-A1
microphone (supplied with the PCS-
XG80) or PCSA-A3 microphone (not
supplied) connected to the MIC (A1/A3)
jacks on the Communication System.
EC-MIC (A7): Select use of the PCSA-A7
echo canceling microphone (not
supplied) connected to the EC-MIC
(A7) jacks on the Communication
System.
AUDIO 1: Select to input the audio of
external equipment connected to the
AUDIO 1 IN jacks on the
Communication System.
AUDIO 2: Select to input the audio of
external equipment connected to the
70
Registering Local Information
AUDIO 2 IN jacks on the
Communication System.
Echo Canceller
Allows you to select whether to use the
internal echo canceller.
On: Enables the internal echo canceller.
Off: Disables the internal echo canceller.
Lip Sync
Allows you to select whether to use the
function.
Sync
Auto: Enables the Lip Sync function.
Off: Disables the Lip Sync function.
Notes
• When "Adaptive Rate Control (ARC)",
"Packet Resend Request (ARQ)" or
"Forward Error Correction (FEC)" is set to
"On" in the QoS setup menu, you cannot set
"Lip Sync" to "Off".
• When "Lip Sync" is set to "Off", you cannot
change the setting for "Adaptive Rate
Control (ARC)", "Packet Resend Request
(ARQ)" or "Forward Error Correction
(FEC)" in the QoS setup menu.
Recording Mute
When you connect an audio recording
device to the AUDIO 1 IN or AUDIO 2 IN
and REC OUT jacks to record audio, this
function reduces oscillations in sound that
occur due to loop-back within audio
recording device.
Off: Disables the recording mute function.
On: Enables the recording mute function.
Notes
• When "Recording Mute" is set to "On", only
signals from external equipment are affected.
Signals from the microphones or remote sites
are not affected. Therefore, the Recording
Mute functions only when "Audio Input" is
set to "AUX" or "MIC+AUX."
• When connecting an audio recording device
to the AUDIO 1 IN or AUDIO 2 IN and REC
OUT jacks, set "Recording Mute" to "On"
and record the sound only from the audio
recording device. If you want to record the
sound on your site as well, also use the
microphone input.
Lip