Editing The Contents Of The Phone Book - Sony Ipela PCS-XG80S Operating Instructions Manual

To connect to the remote party without using bonding
If the system of the remote party is not equipped with the bonding function,
entering one telephone number does not allow you to connect all the line
numbers used to connect to the remote party. To connect to the remote party
by entering all the ISDN line numbers used, you can set the connection without
using the bonding function of this system.
When you set "More Options Enable" to "On" in the Dial setup menu (page
64), the A1, A2, B1, B2, C1 and C2 text boxes appear in the List Edit menu.
Enter all the telephone numbers for the ISDN lines selected by "Number of
Lines".
Note
When you set "Number of Lines" to "2B", you can connect to the remote party by
selecting "ISDN (2B)" from "Line I/F" in the Detailed Dial menu.
To set up more detailed options
When "More Options Enable" is set to "On" in the Dial setup menu, the More
Options button is shown at the lower part of the List Edit menu.
Select the More Options button with the V, v, B or b button on the Remote
Commander and press the ENTER button to open a menu for more detailed
dial settings. You can change the settings of the desired items.
Note
The contents set with the More Options button have priority over those set in the Dial
setup menu.

Editing the Contents of the Phone Book

You can edit the telephone number, IP address, name or setting registered in
the Phone Book.
1
Open the Phone Book.
2
Use the V, v, B or b button on the Remote Commander to select the remote
party to be modified, then press the ENTER button.
The submenu appears.
Cancel
Connect
Edit
Copy
Delete
3
Press the V, v, B or b button on the Remote Commander to select "Edit",
then press the ENTER button.
The List Edit menu appears.
Registering a Remote Party – Phone Book
123