Lan Connection Through Nat (Lan1 Only) - Sony Ipela PCS-XG80S Operating Instructions Manual

To connect to a remote party
Select "IP" under "Line I/F", enter the user name or user number set by the
remote party, and dial.

LAN Connection through NAT (LAN1 Only)

Connection using NAT allows one IP address to be shared by several
computers on the same LAN. This section describes how to set up visual
communication in NAT and global IP environments.
Configuration example
192.100.10.1
/
192.100.10.10
1
Enter a name in "Host Name" under the Basic Setup page in the LAN setup
menu, and enter the appropriate values for "IP Address", "Network Mask",
and "Gateway Address".
2
Set "NAT Mode" to "On" in the NAT Setup page of the LAN setup menu,
and enter the appropriate IP address in "WAN IP Address".
100
Setting Up the Network Configurations
210.10.10.1
Internet
Router
Setup LAN Basic Setup
LAN1 Host Name
DHCP Mode
IP Address
Network Mask
Gateway Address
Primary DNS
Secondary DNS
LAN Mode
210.20.20.1
Router
/
210.20.20.2
(Global address)
Sony
Off
192.100. 10. 10
255.255.255. 0
192.100. 10. 1
Auto
Save Cancel