Sony Ipela PCS-XG80S Operating Instructions Manual page 193

Enter all the parties to which you want to make a multipoint connection.
Phone Book
5
Set up other items.
For details on the setup, see step 3 in "Registering a New Remote Party"
on page 121.
6
Select "Save", then press the ENTER button on the Remote Commander.
Registration of the multipoint connection list is completed.
To specify a remote party registered in the Phone Book to the multipoint
connection list
1
Use the V, v, B or b button on the Remote Commander to select the name
you want to register in the multipoint connection list.
2
Press the
button on the Remote Commander to display the submenu, press the V, v,
B or b button to select "
Phone Book
The
and the remote party is registered in the multipoint connection list.
You can add the
above. The
registered appear as dark marks on the upper right of the Phone Book.
Index
MULTI LIST
Group Select None Specified
IP 123.123.123.1
Dial to: One-Touch Dial Specified
IP 123.123.123.2
Dial to: Number of Connected Sites
IP 123.123.123.3
Dial to:
Line I/F
Communication Bit Rate
Number of Lines
button on the Remote Commander. Or press the ENTER
On", then press the ENTER button.
Default Group
Room 101
ISDN 01-2345-6789
Cancel
On
Connect
Edit
Copy
Delete
(multipoint) mark is added to the lower right of the selected list,
marks to up to five parties using the same procedure as
marks that correspond to the number of the parties you have
Multipoint
None Specified
3
IP
1024Kbps
28(128K)
Save Cancel
Configuring Multipoint
193