Canopy Installation - Hangar 9 85cc Sukhoi SU-26MM Assembly Manual

Canopy Installation

Required Parts
• Fuselage assembly
• Canopy
Required Tools and Adhesives
• Canopy glue
• Painter's tape
• 30-minute epoxy
• Rubbing alcohol

Step 1
Be sure the visor screws are tight. It is recommended to
remove the screws and use a drop of threadlock on them
to prevent vibrations from causing them to vibrate loose.
• Pilot bust
• Felt-tipped pen
• Waxed paper
• Sandpaper
• Paper towel

Step 2
Use 30-minute epoxy to secure the pilot bust to the
canopy hatch.

Step 3
Trim the instrument panel from the decal sheet. Apply the
decal in position in the cockpit.

Step 4
Position the canopy onto the hatch. Use a felt-tipped pen
to trace the outline of the canopy onto the hatch.
29