Radio and Power Systems Requirements
• 48-inch extension (JRPA104) (2)
• 12-inch extension (JRPA098) (5)
• 36-inch Servo Lead Extension (JRPA103)
• 7-channel computer radio system (minimum) w/receiver • JR 537 servo or equivalent non-digital servo for throttle
• Y-harness (JRPA135) for receiver batteries.
An additional Y-harness is necessary when using two rudder servos
• Large Servo Arms (JRPA236) (5, 6 if using two rudder servos)
• JR 8611A or 8711 Metal-Geared High Torque Servo (5) or equivalent
Caution: Only metal-geared servos of 180 oz/in torque or greater should be used on the control surfaces.
• 2700mAh or larger for receiver (2) (A minimum of 3000mAh is required when using super high-torque servos)
• 1500mAh 4.8V battery or larger for ignition
Notes regarding selecting servos:
The elevator will require two servos and mixing through the radio or two servos and a JR
The rudder, when using two rudder servos, will require a JR MatchBox (JRPA0900)
Recommended JR, JR SPORT and Spektrum Systems
• JR
®
10X
• JR XP9303
• JR X9303 2.4
• JR XP7202
• Spektrum
™
DX-7
Recommended Engine Setup
DA-85
• Pitts muffler
or
• MTW 100 canister with header
• 27 x 10 propeller
FS One
With FS One
®
you get more than photorealistic fields, gorgeous
skies and realistic-looking aircraft. You get incredibly advanced
aerodynamic modeling that simulates every possible aspect
of real-world flight.
4
• Fuel Dot (HAN115)
• JR Charge Jack Switch (JRPA004) (3)
• Choke Ring (JRPA029 for throttle servo lead)
JR X9303 2.4
®
MatchBox
Spektrum DX7
HANS2000
Spektrum is used with permission of
Bachmann Industries, Inc.
™
(JRPA0900)
JR 10X