Hangar 9 85cc Sukhoi SU-26MM Assembly Manual page 15


Step 8
Apply a few drops of thin CA into each of the two holes to
harden the wood. This will help in preventing the screws
from vibrating loose.

Step 9
Follow Steps 5 through 8 to attach the tiller arm to the
bottom of the rudder with two #4 x 1/2-inch socket head
sheet metal screws.

Step 10
Attach the tail gear assembly to the bottom of the fuselage
using two #6 x 5/8-inch socket head sheet metal screws.

Step 11
Complete the rudder installation by connecting the tail
wheel to the tiller arm with two steering springs.
15