Hangar 9 85cc Sukhoi SU-26MM Assembly Manual page 18

o
Step 9
Drill the locations marked in the previous step using a
drill and 9/64-inch (3.5mm) drill bit.
o
Step 10
Use pliers to install the two 4-40 blind nuts in the wheel
pant as shown.
18
o
Step 11
Secure the wheel pant to the landing gear using two
4-40 x 1/2-inch socket head screws and two #4 washers.
Note: Always use threadlock on
metal-to-metal fasteners to prevent
them from vibrating loose.

Step 12
Repeat Steps 7 through 11 for the remaining wheel pant.

Step 13
Attach the landing gear fairing back on the fuselage.
Note: If you are installing a canister
muffler system, leave the cover off
until after installing the canister.