Using The Manual; Required Tools And Adhesives; Ultracote Covering Colors; Before Starting Assembly - Hangar 9 85cc Sukhoi SU-26MM Assembly Manual

Using the Manual

This manual is divided into sections to help make assembly easier to understand, and to provide breaks between each
major section. In addition, check boxes have been placed next to each step to keep track of each step completed. Steps

with a single box ( ) are performed once, while steps with two boxes (
repeating, such as for a right or left wing panel, two servos, etc. Remember to take your time and follow the directions.

Required Tools and Adhesives

Tools
• Rotary tool (Dremel)
• Pliers
• T-pins
• Solder
• Solder gun
• Tape
• Phillips screwdriver
• Felt-tipped pen
• Hex wrench: 5/64-inch, 3/32-inch, 7/64-inch, 1/8-inch • Angle Pro Incidence Meter (HAN192)
• Drill bit: 1/16-inch (1.5mm), 5/64-inch (2mm), 5/32-inch (4mm), 3/16-inch (4.5mm)
Adhesives
• Thin CA (PAAPT08)
• 30-Minute Epoxy (HAN8002)
• CA Remover/Debonder (PAAPT16)

UltraCote Covering Colors

• White (HANU870)
• True Red (HANU866)

Before Starting Assembly

Before beginning the assembly of the 85cc Sukhoi SU-26MM, remove each part from its bag for inspection. Closely
inspect the fuselage, wing panels, rudder, and stabilizer for damage. If you find any damaged or missing parts, contact
the place of purchase.
If you find any wrinkles in the covering, use a heat gun or sealing iron to remove them. Use caution while working around
areas where the colors overlap to prevent separating the colors.
HAN101 – Sealing Iron
HAN141 – Sealing Iron
Sock
 
) indicate that the step will require
• Hobby scissors
• Clamp
• Crimping tool/vice grips
• String
• 1/4-inch (6mm) foam
• Hobby knife
• Drill
• Nut driver: 1/4-inch
• Medium CA (PAAPT02)
• Formula 560 Canopy Glue (PAAPT56)
• Pacer Z-42 Threadlock (PAAPT42)
• Bright Yellow (HANU872)
• Pearl Blue (HANU845)
HAN100 – Heat Gun
HAN150 – Covering Glove
3