Landing Gear Installation - Hangar 9 85cc Sukhoi SU-26MM Assembly Manual

Landing Gear Installation

Required Parts
• Fuselage assembly
• #8 washer (4)
• Axle w/nut (2)
• 4-40 blind nut (4)
• 8-32 x 3/4-inch socket head screw (4)
1
• 4 / -inch (114mm) wheel (2)
2
• 4-40 x 1/2-inch socket head screw (4)
• 5/32-inch wheel collar w/setscrews (4)
Required Tools and Adhesives
• Threadlock
• Adjustable wrench (2)
• Drill bit: 9/64-inch (3.5mm)
• Hex wrench: .050-inch, 3/32-inch

Step 1
Remove the landing gear fairing by loosening the two
4-40 bolts with a 3/32-inch ball wrench.
16
• Main landing gear
• 8-32 locknut (4)
• #4 washer (4)
• Drill
o
Step 2
Secure the axle to the main landing gear.
o
Step 3
Use a file to create a flat on the axle for the setscrews in
the collars to tighten onto. This will help in preventing
them from loosening in flight.