o
Step 4
Attach the wheel to the axle using two 5/32-inch wheel
collars. The collars are placed on either side of the wheel.
Note: Always use threadlock on
metal-to-metal fasteners to prevent
them from vibrating loose.
Step 5
Repeat Steps 2 through 4 for the remaining wheel.
Step 6
Attach the landing gear to the fuselage using four
8-32 x 3/4-inch socket head screws, four #8 washers
and four 8-32 lock nuts. The washers will be between the
landing gear and lock nuts on the outside of the fuselage.
o
Step 7
Place the fuselage on a level surface. Slide the wheel pant
into position. The pant must be positioned so it is parallel
with the fuselage as shown.
o
Step 8
Mark the location for the two screws through the landing
gear and onto the wheel pant using a felt-tipped pen.
17