5 Installation
5.4 Mounting
40
Procedure:
1
Configure the communication module as stated in the relevant module description.
2
Choose a free slot for the communication module.
3
Loosen the knurled screws on the slot cover.
4
Remove the slot cover.
5
Fit the communication module in the slot.
6
Fasten the communication module with the two knurled screws.
Refer to the relevant module description for information on protocol, configuration, cable lengths etc. of
the communication module to be used.
MICRO PANEL XV400 10.4"/12.1"/15" 12/2010 MN04802010Z-EN www.eaton.com