Fitting The Communication Module In The Device - Eaton XV400 10.4" Operating Instructions Manual

5.4.1

Fitting the communication module in the device

Fig. 21 Slots fitted with a communication module (A) and a slot cover (B)
The device is provided with two slots for communication modules. Optional communication modules
enable the device to be connected to automation devices (PLC, drive controls etc.) or to fieldbus
systems.

Only communication modules approved by the manufacturer can be fitted. Please con-
tact your supplier.
CAUTION
Live parts in the device
Damage or destruction of components due to handling when the device is open.
Before opening the device:

- De-energize the device.
- Remove the power supply connector from the device.
Ensure that the device is not energized whilst it is open.

Before switching on the device:

- Fit communication modules.
- Fit slot covers on all slots that are not fitted with communication modules.
CAUTION
Electrostatic discharge
Electrostatic discharge may damage or destroy electronic components.
Avoid contact with components (such as connector pins) that are susceptible to

electrostatic discharge.
Discharge (by touching a grounded metal object) any static charge accumulated

in your body before touching the device.
MICRO PANEL XV400 10.4"/12.1"/15" 12/2010 MN04802010Z-EN www.eaton.com
5 Installation
5.4 Mounting
39