Table of Contents
Advertisement
3.3
3.3.1
3.3.2
3.3.3
3.3.4
3.3.5
Mandatory requirements, personnel
Work safety
All applicable work safety regulations (in-house and national) must be observed.
Qualification of personnel
The personnel responsible for installation, operation, maintenance and service must be adequately
qualified. These persons must be sufficiently trained or instructed and they must be informed of all
hazards and risks associated with the device.
Operating Instructions
It must be ensured that any person working with the device in any phase of its lifespan has read and
understood the relevant sections of the Operating Instructions.
WARNING
Incomplete copy of the Operating Instructions
Working with individual pages of these Operating Instructions may cause damage
to property or personnel by failure to observe safety-related information.
Always work with the complete document.
Installation, maintenance and disposal
It must be ensured that the device is properly connected, mounted, maintained and disposed of in
compliance with all relevant standards and safety regulations.
Prohibited use
The implementation of safety functions (relating to the protection of personnel and machinery) using the
device is prohibited.
MICRO PANEL XV400 10.4"/12.1"/15" 12/2010 MN04802010Z-EN www.eaton.com
3 Safety regulations
3.3 Mandatory requirements, personnel
17
Advertisement
Table of Contents
