5 Installation
5.4 Mounting
50
410.0
+1/-1
Fig. 38 Mounting cutout for 15" devices
3
Insert the sealing strip supplied in the groove (A) on the rear of the device front plate and cut it so
that the join is tight.
CAUTION
Poor sealing
Poor sealing resulting from the twisting of the sealing strip or due to a gap between
the ends of the sealing strip.
The join of the sealing strip must be positioned on the bottom of the device.
Do not twist the sealing strip when it is inserted.
Cut the sealing strip to a suitable length so that the join is tight.
Fig. 39 Groove for sealing strip (A)
MICRO PANEL XV400 10.4"/12.1"/15" 12/2010 MN04802010Z-EN www.eaton.com