Disposal - Eaton XV400 10.4" Operating Instructions Manual

8 Storage, transport and disposal

8.4 Disposal

8.4
Materials used in the
device
Materials used in the
packaging
66
Disposal
DANGER
Explosive and toxic materials
Any improper handling causes a risk of explosion due to the lithium battery soldered
in the device and a risk of poisoning due to the mercury content of the cold cathode
tubes.
Dispose of the device properly.

Devices that are no longer used must be properly disposed of in accordance with the applicable national
regulations or returned to the manufacturer or sales office.
Component
Housing
Front plate, depending on the device version:
Devices with standard front
Devices with 4-hole front
Devices with stainless steel
front
Infra-red frame
Infra-red touch protective panel
Resistive touch back panel
Cold cathode tubes
Battery
Electronic components
Tab. 20 Materials used in the device
Packaging
External packaging
Internal packaging:
10.4" and 12.1" devices
15" devices
Tab. 21 Materials used in the packaging
MICRO PANEL XV400 10.4"/12.1"/15" 12/2010 MN04802010Z-EN www.eaton.com
Material
Galvanized sheet steel
Aluminum, Peraluman 101 anodized
Aluminum, Peraluman 101 anodized
Stainless steel
Polycarbonate (PC)
Glass
Glass with polyester foil
Mercury (< 5 mg)
Lithium
Various
Material
Cardboard
Cardboard with PE foil

Plastic bag: Polyethylene (PE)

Closed-cell polyethylene foam, CFC-free

Plastic bag: Polyethylene (PE)
