Operating And Indication Elements; Operating And Indication Elements On The Front - Eaton XV400 10.4" Operating Instructions Manual

4
4.1

Operating and indication elements

Operating and indication elements on the front

Fig. 5 Operating and indication elements on the front (figure shows device with infra-red touch)
The device has the following operating and indication elements on the front:
Element
A Touch sensor
B Display
Tab. 7 Operating and indication elements on the front
MICRO PANEL XV400 10.4"/12.1"/15" 12/2010 MN04802010Z-EN www.eaton.com
4 Operating and indication elements
4.1 Operating and indication elements on the front
Function
Detection of the actuation of the operating elements shown on the
display.
Resistive touch:

These devices are operated by touching the operating elements with
your finger or with a stylus.
Infra-red touch:

These devices are operated by interrupting the infra-red light matrix
with your finger or a suitable object (min. ø 7 mm). It is not necessary
to touch the infra-red touch protective panel.
Display operating and indication elements.
21