Operation; Safety Regulations - Eaton XV400 10.4" Operating Instructions Manual

6
6.1

Operation

Safety regulations


Read Chapter 3 Safety regulations,  15 before working with the device. This contains
important information for your personal safety.
CAUTION
Sensitive resistive touch surface
Damage to the resistive touch due to the use of pointed or sharp objects.
Only activate the resistive touch with your finger or a stylus.

When wearing gloves, ensure that these are clean. They must not be covered

with abrasive dust or sharp particles.
CAUTION
Device condensation
If the device is or was exposed to climatic changes (temperature fluctuation, air hu-
midity) moisture can form on or in the device (device condensation). In this case,
there is a risk of short-circuit.
The device must not be switched on when device condensation is present.

If condensation is present on the device, or if it was exposed to temperature fluc-

tuations, it must be allowed to adjust to room temperature (do not expose the de-
vice to the direct heat of heating devices) prior to commissioning.
MICRO PANEL XV400 10.4"/12.1"/15" 12/2010 MN04802010Z-EN www.eaton.com
6 Operation
6.1 Safety regulations
55