Adjustment/Assembly instructions
6.10 Adjusting the height of the armrest for desk side panel
The armrest can be adjusted in height by bringing it into various positions without use of any
tools. For this purpose, pull the button in the round opening in the side panel upward and shift
the armrest into the desired position. The armrest automatically locks in place after releasing
the button.
6.11 Adjusting the back height
The back height is adjustable by 10 cm. The back tube which is integrated into the posterior
frame allows for the adjustment of the back height in increments of 2.5 cm.
For this purpose, remove the screws from the rear wheel adapter and set the desired back height.
Make sure to firmly retighten all screws and nuts after making adjustments. The proper
INFORMATION
torque is 8 Nm.
66 | Ottobock
50
52
51
Motus CV/CS