Nuts, Bolts, Fasteners; Wheels/Tires - Honda CBR150R Manual

MAINTENANCE
Check for worn wheel bearing by grabbing the rear wheel,
and attempting to move the wheel side to side.
Replace the bearings if any looseness is noted (page 15-
61.
NUTS, BOLTS, FASTENERS
Check that all chassis nuts and bolts are tightened to their
correct torque values (page 1-13).
Check that all safety clips, hose clamps and cable stays
are in place and properly secured.
WHEELS/TIRES
NOTE:
Tire pressure should be checked when the tires are COLD.
RECOMMENDED TIRE PRESSURE AND TIRE SIZE:
Front: 200 kpa (2.00 kgflcd, 29 psi)
Rear: 200 kpa (2.00 kgflcd. 29 psi1
Front: 200 kpa (2.00 kgflcnl. 29 psi)
Rear: 225 kpa (2.25 kgflcd. 33 psi)
Check the tires for cuts, embedded nails,
or
other damage.
Check the front and rear wheels for trueness (refer t o
section 14 and 15).
Check the tread depth.
Replace the tires when the tread depth reaches the fol-
lowing limits.
MINIMUM TREAD DEPTH: To the indicator
Driver only:
Driver and passenger:
3-2
1