Headlight Aim 3-1; Clutch System 3-1 - Honda CBR150R Manual

MAINTENANCE
HEADLIGHT AIM
An improperly adjusted headlight may blind on-coming
drivers, or it may fall to light the road for a safe distance.
NOTE:
Adjust the headlight beam as specified by local laws and
reoulations.
Place the motorcycle on a level ground.
Adjust the headlight beam vertically by loosening the
screw and move the headlight unit.
CLUTCH SYSTEM
Check the cable and clutch lever for loose connections,
excessive play, or other damage.
Replace or repair if necessary.
Inspect the clutch cable for kinks or damage, and lubri-
cate the cable.
Measure the free play at the tip of the clutch lever.
FREE PLAY 10
-
20 m m (318
-
13/16
in)
I
10
-
20 mm (0.4
-
0.8 in)
Adjust as follows:
Minor adjustment can be done with the upper adjuster.
Loosen the lock nut and turn the adjuster.
After adjustment, tighten the lock nut.
Major adjustment are ma 'with the lower adjusting nut.
If the major adjustment is required, turn the upper adjuster
all the way in and back out
7
turn.
Loosen the lock nut and adjusting nut and turn the
adjusting nut to adjust free play.
Tighten the upper and lower lock nuts.
Check the clutch operation.
If the free play cannot be obtained, or the clutch slips
during test ride, disassemble and inspect the clutch
(section 8).
ADJUSTER
3-1 9