Cleaning And Lubrication; Sprockets Inspection - Honda CBR150R Manual

MAINTENANCE
CLEANING AND LUBRICATION
Clean the chain with non-flammable or high flash point
solvent and wipe it dry.
Be sure the chain has dried completely before lubricating.
Inspect the drive chain for possible damage or wear.
Replace any chain that has damaged rollers, loose fitting
links, or otherwise appears unserviceable.
installing a new chain on badly worn sprockets will cause
the new chain to wear quickly.
Inspect and replace sprocket as necessary.
Lubricate the drive chain with #80
-
90 gear oil or drive
chain lubricant designed specifically for use with O-ring
chains. Wipe off the excess oil or chain lubricant.
SPROCKETS INSPECTION
Inspect the drive and driven sprocket teeth for wear or
damage, replace if necessary.
Never use a new drive chain on worn sprockets.
Both chain and sprockets must be in good condition, or
the new replacement chain will wear rapidly.
Check the attaching bolts and nuts on the drive and driven
sprockets.
If any are loose, torque them.
TORQUE:
Drive sprocket fuing plate bolt : 10 N.m (1 .O kgf.m, 7 Ibf.ft)
Driven sprocket nut : 64 N.m (6.5 kgf.m, 47 Ibf+t)
NON-FLAMMABLE
OR
HIGH-FLASH
POINT SOLVENT
CLEAN
FT BRUSH
WIPE AND DRY
PRO HONDA CHAIN LUBE
3-1 6