Kubota M100GX Operator's Manual page 166

144 TROUBLESHOOTING
Displayed error code
Engine
Power shift
speed
number
display
display area
area
E-R31 to 36
to
flashing
E-R45 to 50
E-R52 to 55
flashing E-R38 to 44
flashing E-R44
lighting ---
and
flashing E-R51
alternately
and
flashing E-R20
alternately
Displayed error code
Engine
Range shift
speed
position
display
display area
area
flashing ---
Note: If the hydraulic clutch gets in trouble, the gears may get shifted from the 1st to 2nd or slower
speed automatically. This is to prevent the tractor from free-wheel. In such case, carefully
move the tractor to a safe place, contact your local KUBOTA Dealer for repairs.
Alarm buzzer
A Trouble
3 consecutive solenoid valve.
tones A Proportional
(range shift L/H) trouble.
A Trouble with a hydraulic switch
that is not related to the flashing
--- gear speed.
A Hydraulic switch trouble.
A Main spool trouble
A Shifting is performed using the
shift buttons.
3 consecutive A Hydraulic switch trouble.
tones A Main spool trouble.
A Started by operation of the shift
buttons,
3 consecutive clutch pedal.
tones A Trouble with master clutch
hydraulic switch trouble.
A Low system hydraulic pressure.
A Power shift lever is operated
with the shuttle lever is in the F
Consecutive
or R position, the clutch pedal is
tones
released and the shift lock is not
turning on.
A [L and 1 to 8] and shift lock
3 consecutive switch trouble occur at the
tones same time.
A [C and 1 to 8] and shift lock
switch trouble occur at the
3 consecutive
same time.
tones
Alarm buzzer
A Trouble with the output voltage
--- of the power shift lever sensor.
Condition
with the relevant Contact your local KUBOTA Dealer.
(If necessary, move the range shift
solenoid valve lever to N. The machine can travel at
any of gears which is not flashing.)
Contact your local KUBOTA Dealer.
(If necessary, move the range shift
lever to N first and then to L, H or M
again. The machine can travel.)
Contact your local KUBOTA Dealer.
(If necessary, move the range shift
lever to N first and then to L, H or M
again. The machine can travel.)
(Machine gear position return to the
position before shifting.)
Contact your local KUBOTA Dealer.
shuttle lever, and (The machine cannot travel.)
Move the range shift lever to N.
Contact your local KUBOTA Dealer.
(If necessary, move the range shift
lever to L. The machine can travel at
any of 1st to 8th gears.)
Contact your local KUBOTA Dealer.
(If necessary, move the range shift
lever to L. The machine can travel at
any of 1st to 8th gears.)
Condition
Contact your local KUBOTA Dealer.
Flashes while driving. (The machine
can travel.)
Operator's action
Operator's action