Installing The Implement Control Box; Electrical Outlet - Kubota M100GX Operator's Manual

96 CAB OPERATION
INSTALLING THE IMPLEMENT CONTROL
BOX
1. Make a slit into the corner cover. Introduce the
implement control cable and hydraulic hose through
this slit into the CAB.
(1) Corner cover
2. Remove the plugs in inner roof, and cut off the hatched
zone of the rear pillar cover with a utility knife. Attach
the control box stay with internal nuts.
(1) Plug
(2) Pillar cover
(3) M6 nuts

ELECTRICAL OUTLET

BElectrical Outlet
A electrical outlet is supplied for use with implement.
(1) Connector for loader electrical outlet (15A)
(2) Accessory electrical outlet (20A)
(1) Accessory electrical outlet (15A)