Kubota M100GX Operator's Manual page 173

5. Using Switches 2 and 3, select the "graph". Press
Switch 4, and the graph is displayed.
(1) Switch
C Viewing the graph
(1) Press Switch 4, and the fuel consumption and the
operating hours are alternately displayed.
(2) Fuel consumption:
The bar graph shows the day's fuel consumption.
When a date is selected with Switch 2 or 3, the
fuel consumption of the day and that of the month
are digitally displayed.
(3) Operating hours:
The bar graph shows the day's operating hour.
When a date is selected with Switch 2 or 3, the
operating hours of the day and that of the month
are digitally displayed.
6. Using Switches 2 and 3, select the "page feed". Press
Switch 4, and the work history's "stop" or "restart"
screens appear.
(1) Switch (A) "Page feed"
(B) "Stop (with work history enabled)"
(C) "Restart (with work history disabled)"
(A) "Graph"
(B) "Fuel consumption"
(C) "Operating hours"
Press Switch 3 to select "STOP". Press
Switch 4, and the following confirmation
screen appears. Select "YES" and
press Switch 4, and the work history will
stop and various setting mode screen
shows up instead.
STOP
Press Switch 3 to select "RESTART".
Press Switch 4, and the clock setting
RESTART
screen shows up. Set the clock, and the
work history will get restarted.
Press Switch 3 to select "CLEAR".
Press Switch 4, and the following
confirmation screen appears. Select
"YES" and press Switch 4, and the work
history will be cleared and get in initial
state. Then various setting mode
CLEAR
screen shows up instead.
7. When the mode selector switch is pressed on the
calendar screen, various setting mode screen shows
up again. Press the same switch once more, and the
usual mode screen is resumed.
APPENDICES 151