Power Shift/Range Shift Trouble Shooting - Kubota M100GX Operator's Manual

POWER SHIFT/RANGE SHIFT TROUBLE
SHOOTING
If something is wrong with the power shift / range shift, an
alarm sounds or the error code shown below is displayed
on the liquid crystal display, indicating the location of the
trouble. If an error code appears, immediately contact
your local KUBOTA Dealer for repairs. Depending on the
parts of the trouble, tractor can be used with some
restriction as emergency measure. For details, check the
error code and operator's action columns.
Displayed error code
Engine
Power shift
speed
number
display
display area
area
and
to E-R51
flashing
alternately
and
to E-R20
flashing
alternately
flashing E-R37
--- ---
Alarm buzzer
A Clutch is operated.
A Hydraulic
trouble.
3 consecutive
A Proportional
tones
(master) trouble.
A Trouble with the output voltage
of the clutch pedal sensor.
A Clutch pedal sensor trouble.
3 consecutive
tones
3 consecutive A Proportional
tones (master) trouble.
A Shuttle switch (F/R) trouble.
---
A Shuttle F/R is not displayed.
(1) Power shift number display area
(2) Range shift position display area
(3) Engine speed display area
Condition
Contact your local KUBOTA Dealer.
switch (master) (If necessary, move the range shift
lever to L. The machine can travel at
solenoid valve any of 1st to 8th gears.)
Contact your local KUBOTA Dealer.
(If necessary, move the range shift
lever to N (in the L side) first and then
to L. The machine can travel at any
of 1st to 8th gears.)
solenoid valve Contact your local KUBOTA Dealer.
(The machine cannot travel.)
Contact your local KUBOTA Dealer.
(The machine cannot travel.)
TROUBLESHOOTING
Operator's action
143