Operation - Kubota M100GX Operator's Manual

94 CAB OPERATION
C Recirculation / fresh air selection switch
Each time the switch is pressed, the air flow position
changes for "RECIRCULATION" or "FRESH AIR". An
indicator light will light up when the switch is set to
"RECIRCULATION". And the indicator light will be off
when the switch is set to "FRESH AIR".
FRESH AIR: Fresh air will flow into the CAB.
(Indicator: OFF) This is helpful when you work in
dusty conditions or if the glass
windows get foggy.
RECIRCULATION: In-CAB air will be recirculated.
(Indicator: ON) This is useful for cooling or heating
the CAB quickly or keeping it extra
cool or warm.
(1) Recirculation / fresh air
selection switch with
indicator light
A When heating, do not keep the switch at the
"RECIRCULATION" position for a long time. The
windshield easily gets foggy.
A While working in a dusty conditions, keep the switch at
the "FRESH AIR" position. This increases the
pressure in the CAB, which helps prevent dust from
coming into the CAB.
BOperation
C Heating
1. Set the mode switch to the
2. Set the recirculation / fresh air selection switch to the
"FRESH AIR" position. To raise the temperature in the
CAB quickly, set this switch to the "RECIRCULATION"
position.
3. Adjust the blower (1/2/3/4) switch and the temperature
control dial to achieve a comfortable temperature
level.
(A) "RECIRCULATION"
(B) "FRESH AIR"
position.
(1) Mode switch
(2) Blower switch
(3) Temperature control dial
(4) Recirculation / fresh air selection switch with
indicator light
4. Adjust the air volume and air direction from the
dashboard air outlets. In general, open Feet area air
outlets, and shut Face / Back area air outlets.
(1) Face area air outlets
(2) Back area air outlets
(3) Feet area air outlets
C Cooling or dehumidifying-heating
1. Set the mode switch to the
2. Set the recirculation / fresh air selection switch to the
"FRESH AIR" position. To fall the temperature in the
CAB quickly, set this switch to the "RECIRCULATION"
position.
3. Press and turn on the air-conditioner switch with
indicator.
4. Turn on the blower (1/2/3/4) switch.
5. Adjust the temperature control dial to the "COOL" or
an intermediate position to achieve a comfortable
temperature level.
(A) "WARM"
(B) "COOL"
position.