Measuring The Distance; Changing The Units And Dates - Kubota M100GX Operator's Manual

152 APPENDICES
BMeasuring the Distance
1. Hold down the mode selector switch on the usual
screen, and various setting mode screen shows up.
Press Switch 3 to select the distance measuring
mode. Press Switch 4, and the distance measuring
mode screen appears.
(1) Mode selector switch
(2) Switch
2. Press Switch 1, and the distance data goes back to
"0". Press Switch 4, and measuring the distance starts.
Press this switch again to stop the measurement.
(1) Switch
(A) "Distance measuring mode"
BChanging the Units and Dates
1. While holding down the mode selector switch, turn on
the key switch. The following screen appears.
2. Using Switch 3, select "UNIT" or "YEAR". Press
Switch 4, and the setting screen shows up.
(1) Mode selector switch
(2) Switch
C Setting the units
Using Switch 3, select the units of "JAPAN/EU" or "USA".
Press Switch 4 to save this setting.
(1) Switch
Unit
JAPAN/EU km, L,
USA ft, gal,