Steering Adjustment; Extendable Mirror; Light Switch; Turn Signal / Hazard Light Switch - Kubota M100GX Operator's Manual

BSteering Adjustment
To avoid personal injury:
A Do not adjust the steering wheel while the
tractor is in motion.
Adjust the steering wheel to the best driving position using
tilt and telescope levers.
(1) Tilt lever
(2) Telescope lever
BExtendable Mirror
1. To alter the length: Loosen the knob bolt and move the
mirror to the required position, then tighten the knob
bolt.
2. To adjust mirror head: Hold firmly, tilt horizontally and
vertically as required.
(1) Knob bolt
(A) "UNLOCK"
(B) "LOCK"
OPERATING THE TRACTOR
2. Selecting Light Switch Positions.
BLight Switch
1. Turn the key to the "ON" position.
2. Turn the switch knob clockwise, and the following
lights are activated on the knob position.
OFF...... Head lights OFF.
....... Head lights dimmed, low beam.
....... Head lights ON, high beam.
(1) Head light switch
A High beam indicator will be on when head light switch
is in "high beam" position.
BTurn Signal / Hazard Light Switch
C Hazard Light
1. When the hazard light switch is pushed, the hazard
lights flash, along with the L/H and R/H indicators on
the instrument panel.
2. Push the hazard light switch again to turn off the
hazard lights.
C Turn signal light
To indicate a right turn, turn the turn signal light switch
clockwise. To indicate a left turn, turn the turn signal light
switch counter-clockwise. The corresponding right and
left turn signal lights and indicator on the instrument panel
will flash.
A The hazard light switch is operative when the key
switch is in the "ON", "ACC" or "OFF" position.
A The turn signal light switch is only operative when the
key switch is in the "ON" position.
A Be sure to return the turn signal switch to center
position after turning.
31