Fujitsu ETERNUS DX100 S3 Setup Manual page 70

Chapter 5 Host Interface Management
5.1 Add LUN Group
The main setting item is as follows.
●
LUN Group Setting
• Name
3
Click the [Add] button.
 The [Add LUN] screen appears.
4
Specify the LUN to start allocation volumes from, specify the number of LUNs, and select
which volume numbers are to be allocated to the corresponding LUNs.
The main setting items are as follows.
●
LUN Setting
• Start Host LUNs
• Number of LUNs
• Select Volume
5
Click the [OK] button.
 Returns to the [Add LUN Group] screen.
6
Repeat
the volumes.
Step 3 through Step 5 to set multiple allocation information between the LUNs and
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED
70
P2X0-1250-06ENZ0