Fujitsu ETERNUS DX100 S3 Setup Manual page 97

Chapter 5 Host Interface Management
5.6 Create Host Affinity
■ When "All" is selected
(1)
Select a host response, and click the [OK] button.
To allow all of the hosts to recognize the LUN group, select "All" for "Target Connection" and then
select the host response. "All" is displayed in "All (host response name)" format.
 The display returns to the initial screen.
4
Click the [Browse...] button for the CA port group.
 The [Select CA Port Group] screen appears.
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED
97
P2X0-1250-06ENZ0