Fujitsu ETERNUS DX100 S3 Setup Manual page 31

Chapter 3 Initial Setup
3.1 Initial Setup 1
6
Proceed to [Register Advanced Copy License].
6-1
Specify the parameters.
The main setting items are as follows.
-
-
•
•
•
•
6-2
Click the [Next >>] button.
 A confirmation screen appears.
6-3
Click the [OK] button.
 The Advanced Copy license registration is executed.
6-4
Click the [Done] button.
Registration Method (only for the ETERNUS DX100 S3/DX200 S3 and the ETERNUS DX200F)
License Key
When using ETERNUS SF AdvancedCopy Manager or ETERNUS SF Express, refer to the
documents that are supplied with ETERNUS SF AdvancedCopy Manager or ETERNUS SF Express.
If an Advanced Copy license (trial license) is already registered, the paid license can be
registered. Input the license key.
If the Advanced Copy license (paid license) is already registered, proceed to [Register SED
Authentication Key].
Click the [Skip] button to proceed to the next screen without setting.
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED
31
P2X0-1250-06ENZ0