Fujitsu ETERNUS DX100 S3 Setup Manual page 93

Chapter 5 Host Interface Management
5.5 Add Host Groups
■ When registering a host by manually specifying the host
(1)
Click the [Manual Input] tab.
(2)
Click the [Add] button.
 The [Add FC/FCoE Host] screen appears.
(3)
Manually specify the WWN of the host that is to be registered.
The main setting item is as follows.
●
Host Setting
-
(4)
Click the [OK] button.
 Returns to the [Manual Input] screen.
(5)
Repeat
WWN
Step (2) through Step (4)
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED
to set more WWNs.
93
P2X0-1250-06ENZ0