Fujitsu ETERNUS DX100 S3 Setup Manual page 30

Chapter 3 Initial Setup
3.1 Initial Setup 1
5
Proceed to [Set Thin Provisioning].
5-1
Specify the parameters.
The main setting items are as follows.
-
-
Click the [Skip] button to proceed to the next screen without setting.
5-2
Click the [Next >>] button.
 A confirmation screen appears.
5-3
Click the [OK] button.
 The Thin Provisioning setting starts.
5-4
Click the [Done] button.
Thin Provisioning (Enable/Disable)
Maximum Pool Capacity
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED
30
P2X0-1250-06ENZ0