Fujitsu ETERNUS DX100 S3 Setup Manual page 33

Chapter 3 Initial Setup
3.1 Initial Setup 1
8
Proceed to [Setup Network Environment].
8-1
Specify the parameters.
The main setting items are as follows.
-
-
-
-
Set the network environment for the MNT port. If the network environment setting is not changed
from the factory default setting, some functions will not be available. Refer to "Caution" in
"Chapter 3 Initial Setup" (page 25)
Guide (Settings)".
Click the [Skip] button to proceed to the next screen without setting.
8-2
Click the [Next >>] button.
 A confirmation screen appears.
8-3
Click the [OK] button.
 Setting of the network environment starts.
8-4
Click the [Finish] button.
 A completed screen appears.
Select Network Port
LAN
IPv4 Settings
IPv6 Settings
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED
and "Setup Network Environment" in "ETERNUS Web GUI User's
33
P2X0-1250-06ENZ0