Fujitsu ETERNUS DX100 S3 Setup Manual page 88

Chapter 5 Host Interface Management
5.3 Create CA Port Groups
2
Specify the name of the port group to be created and select all the ports to be registered in
the port group.
The main setting items are as follows.
●
CA Port Group Setting
• Name
• Checkbox to select ports
3
Click the [Create] button.
 A confirmation screen appears.
4
Click the [OK] button.
 Registration of the FC port group starts.
5
Click the [Done] button to return to the [CA Port Group] screen.
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED
88
End of procedure
P2X0-1250-06ENZ0