Fujitsu ETERNUS DX100 S3 Setup Manual page 125

Appendix B Structures for Host Connection
• CA port group settings (Refer to "Create FC Port Group", "Create iSCSI Port Group", "Create SAS Port Group", or
"Create FCoE Port Group" in "ETERNUS Web GUI User's Guide (Settings)" for details).
No.
1 CA Port Group X
2 CA Port Group Y
Port#0: CM#0 CA#0 Port#0
Port#1: CM#1 CA#0 Port#0
Port#2: CM#0 CA#0 Port#1
Port#3: CM#1 CA#0 Port#1
• LUN group settings (Refer to "Add LUN Group" in "ETERNUS Web GUI User's Guide (Settings)" for details).
No.
1 LUN Group XX
2 LUN Group YY
• Host affinity settings (Refer to "Create Host Affinity" in "ETERNUS Web GUI User's Guide (Settings)" for
details).
No.
1 Host Group A
(Default)
2 Host Group B
(Default)
3 Host Group C
(*1) (Default)
4 All
(*2) (Default)
*1: Setting example when specifying a host group that accesses LUN group YY via CA port group Y.
*2: Setting example when a host group that accesses LUN group YY via CA port group Y is not specified.
• In setting example No.4, LUN groups other than "LUN group YY" cannot be allocated to the "CA port
group Y".
• In setting example No.4, the "CA port group Y" for which "All" is selected cannot be used for setting
host affinity with the specified host group (setting examples No.3 and No.4 cannot be configured in
the same environment).
CA port group
Port#0, Port#1
Port#2, Port#3
LUN group Host LUN
0
1
2
0
1
Host group CA port group
CA Port Group X
CA Port Group X
CA Port Group Y
CA Port Group Y
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED
Port
LUN
Vol#1
Vol#2
Vol#3
Vol#10
Vol#11
LUN group
LUN Group XX
LUN Group XX
LUN Group YY
LUN Group YY
125
Description
A host affinity with the affinity mode
set to "ON".
A host affinity with the affinity mode
set to "ON".
A host affinity with the affinity mode
set to "ON".
A host affinity with the affinity mode
set to "OFF".
P2X0-1250-06ENZ0