Fujitsu ETERNUS DX100 S3 Setup Manual page 57

Chapter 4 Configuration Settings for RAID Groups or Thin Provisioning
4.4 When Using Thin Provisioning Volumes (TPVs)
■ Automatically selecting drives to create TPPs
To create a new TPP automatically, select Drive Type and RAID Level, and input TPP capacity. The Controlling
CM of the RAID groups that configure the TPP is determined automatically.
The procedure to create a TPP by selecting drives automatically is as follows:
Procedure
1
Click [Create] in [Action].
 The [Create Thin Provisioning Pool] screen appears.
2
Select "Automatic" for the create mode and specify the other parameters.
The main setting items are as follows.
●
New Thin Provisioning Pool
• Name
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED
57
P2X0-1250-06ENZ0