hsr-benelli S-series Service Manual page 88

ATTENTION:
While mounting the counter-face and mechanical
seal make sure that they are clean and bear no traces
of grease.
Position the counter face as in the figure (10).
Position the mechanical seal (11) until it touches as shown in
the figure.
Position the rotor (12) making it meets clutch (A).
Position the sealing washer (13) and fix it tight with the nut
(14).
8 N·m 0.8 Kg-m
Always use LOCTITE 243®
ver.2009_03 Page 88/215