hsr-benelli S-series Service Manual page 101

Apply Loctite 5699 on the surface of the transmission
cover
Assembling transmission on the engine
Put in place the transmission housing and tighten 3 x
bolts.
NOTE: Pay attention not to damage the oil seal by
thread of the crankshaft
NOTE: Insure that the oil delivery line will be placed
in between the engine and the transmission housing.
Apply on the thread of all 3
RED Weicon Lock AN 305-86
screws. Ensure the copper gasket is used on the bigger
one.
ver.2009_03 Page 101/215