Engine; Engine Removal And Installation - hsr-benelli S-series Service Manual

3

Engine

3.1 Engine Removal and Installation

The installation of the engine and engine subsystems is the reverse to their removal. During
engine installation, several important notes must be made.
Always verify the correct number of engine mounting strap shims are installed on
each engine mounting post. Remove the pump to check driveshaft alignment, add
shims to move the engine up or down to align properly.
Always verify that the engine does not interfere with critical routings such as the
steering cable, cooling hoses, and main wiring harness.
Steering cable must be fixed on front left engine mounts to avoid damage from
engine.
ver.2009_03 Page 33/215