General Information; Introduction - hsr-benelli S-series Service Manual

1. General Information

1.1 Introduction

This manual contains an introductory description of the HSR-Benelli Series-R and
Series-S Personal Water Craft (PWC) together with the procedures for
control/intervention and revision of the main components. It is designed primarily for
use by trained mechanics in a properly equipped workshop. A basic knowledge of
mechanics, the proper use of tools, and workshop procedures must be understood in
order to carry out maintenance and repair satisfactorily. All adjustments,
maintenance, and repair should be carried out only by qualified mechanics in
accordance with this service manual.
* The present manual has been prepared on the basis of state-of-the-art specifications valid at the
date of publication. In the case of modifications carried out after this date, differences may exist
between the contents of the manual and the PWC under review.
* The illustrations in this manual are used to highlight the fundamental principles and procedures of
basic interventions. They may not show exactly the PWC in your possession.
SYMBOLS
Whenever you see these ATTENTION symbols, heed their instructions!
Always follow safe operating and maintenance practices.
ver.2009_03 Page 7/215